Seachem

Flourite Black Aquarium Substrate is a specially fracted stable porous clay gravel for the natural planted aquarium. Its appearance is best suited to planted aquaria, but may be used in any freshwater aquarium environment. Flourite Black is most effective when used alone as an integral substrate bed, but it may be mixed with other gravels. Gravel modifiers such as laterite are not necessary. Flourite Black is not chemically coated or treated and will not alter the pH of the water. Flourite Black is good for the life of the aquarium and need not be replaced.

• Premium natural substrate
• Can be used in any freshwater aquarium environment.
• Good for the life of your aquarium
• Will not alter your aquariums pH
• Not chemically coated or treated

INSTRUCTIONS: Although it is pre-washed, because Flourite Black is a natural product, it may become dusty in transit and require rinsing before use to remove any residual dust. When adding water to your aquarium, fill slowly to avoid disturbing Flourite substrate bed. Place a bowl in the aquarium and add water directly to the bowl, allowing water to overflow softly on to the gravel bed. Initial cloudiness is normal. To remove cloudiness, use mechanical filtration (such as filter floss).

Flourite Black Sand is a specially fracted stable porous clay gravel for the natural planted aquarium. Its appearance is best suited to planted aquaria, but may be used in any freshwater aquarium environment. Flourite Black Sand is most effective when used alone as an integral substrate bed, but it may be mixed with other gravels. Gravel modifiers such as laterite are not necessary. Flourite Black Sand is not chemically coated or treated and will not alter the pH of the water. Flourite Black Sand is good for the life of the aquarium and need not be replaced.

• Made in USA
• Premium Natural Substrate
• Good for the Life of your Aquarium
• Will Not Alter your Aquariums pH
• Mineral-Rich Substrate Improves Aquarium Plant Growth

INSTRUCTIONS: Although it is pre-washed, because Flourite Black Sand is a natural product, it may become dusty in transit and require rinsing before use to remove any residual dust. When adding water to your aquarium, fill slowly to avoid disturbing Flourite Black Sand substrate bed. Place a bowl in the aquarium and add water directly to the bowl, allowing water to overflow softly on to the gravel bed. Initial cloudiness is normal. To remove cloudiness, use mechanical filtration (such as filter floss). Use Clarity to accelerate clearing.

The Seachem Algae Pads (3 Pack) are non-scratch algae pads for glass & acrylic. The melamine foam uses micro abrasive technology to easily remove algae from the sides of your aquarium. They are particularly effective at removing algae from scratches. They are chemically inert and does not use soaps or detergents. Their white color contrasts against dark algae making it easier to see when areas are fully clean.

• 4.5" x 2.5"
• 25 mm Thick
• 3 Pack

The sachem algae pad is a non-scratch, dual-surface algae pad that is suitable for use on Glass or acrylic tanks. Designed with micro-abrasive technology with an added durable scrubbing side.

• For glass or Acrylic
• No soaps or detergents
• Effectively removes algae
• FOUR

Made of melamine foam, the Seachem DuoPad features Micro Abrasive Technology with Added Durable Scrubbing Surface to make cleaning your aquarium a cinch. It is safe for glass and acrylic aquariums and includes no soaps or detergents. The SeaChem DuoPad also effectively removes algae from scratches.

When precision matters, the Seachem Digital Spoon Scale is the perfect companion tool for the serious aquarist. Accurate and easy to use, it will ensure precise dosing of any chemical or supplement up to 300 grams in 0.1 increments. The LCD display will display results in either grams or ounces and can be switched at the push of a button. It is corrosion resistant and colored to resist stains.It runs on 2 AAA batteries (included) with an easy-access battery compartment.

Seachem Flourish Glue bonds your aquarium plants and moss to rocks, driftwood and gravel in seconds, eliminating the hassle of using thread or weights to keep them in place. Flourish Glue has superior control, hold and durability and can be used underwater in fresh and saltwater aquariums.

• Attach moss and plants to rocks, driftwood and even gravel
• Eliminate the hassle of thread and weights
• May be used underwater in fresh or saltwater aquariums

Flourish Glue is incredibly easy to use, and is especially useful for planting bunch plants. Just apply the gel, plant as usual and the plant will stay rooted in the substrate.

Flourish Glue is a cyanoacrylate gel that can be used for any aquascaping needs or plastics repairs. It comes in an aluminum tube for extended stability beyond products in plastic bottles, and will not dry up in the tube with the cap properly secured.

Directions: Dispense a small amount of glue prior to each use. Apply a small amount of glue to moss or plant roots and press against desired surface for 20 seconds. For bunch plants, apply glue and plant as usual. Wipe tip free of glue before replacing the cap.

Warning: Cyanoacrylate. Danger. Bonds skin and eyes in seconds. Keep out of the reach of children. Eye and skin irritant. If eye contact occurs, rinse with water for 5-10 seconds.

Seachem Reef Glue is a superior bonding gel, powerful and versatile enough for a wide variety of aquarium applications. Use for aquascaping, repairing plastics, and gluing or mounting coral frags to reef rock. It bonds within seconds for excellent control and ease of use.

• Superior cyanoacrylate gel for aquarium applications
• Bonds within seconds for excellent control, hold and durability
• Use for aquascaping, repairing plastics and mounting coral frags
• Can be used underwater
• Suitable for fresh and saltwater

Reef Glue comes in an aluminum tube for extended life and stability, beyond that of products contained in plastic bottles. Will not dry in tube.

Directions: To adhere frags, colonies, or for general aquascaping, first test fit the item to be glued onto the site it is to be adhered. Note the contact points the item has with the site. Retrieve the item and, while not submerged, place a small amount of glue on each site contact point. Quickly fit the item onto the site again. A skin will form over the glue upon contact with water. It is helpful to break this skin slightly while in contact with the site. Hold the item down for about 15 seconds (more in areas of strong flow). Check that the item is secure. Repeat as necessary in order to build up a small amount of glue for a more secure hold.

Seachem The Bag Welded Filter Bag is welded filter bag with a durable non-stitched seam. The Bag is unlike other filter bags in that it is resistant to acids, bleach and other harmful materials, and will not degrade over time.

• Resistant to bleach, caustics and acids
• Easily usable with almost any kind of filter
• Welded filter bag with durable non-stitched seam

Utilizing 180 micron mesh, the welded filter bag comes with a convenient resealable locking closure and is easily adaptable to many different varieties of filters.

Specifications: 180 Micron Mesh Bag (5"W x 10"H)

Water Garden Oasis Pond Prime completely conditions your pond water, removing chlorine and chloramine, and detoxifying harmful ammonia and nitrite. This concentrated formula also helps neutralize heavy metals and stimulates your fishes' natural slime coats.

• Complete, concentrated conditioner for decorative ponds
• Removes chlorine and chloramine and detoxifies ammonia, nitrate and nitrite
• 5X more concentrated than other pond conditioners

Pond Prime is an essential part of setting up a new pond, adding water, and water changes. It does not cause a pH drop or overactivate skimmers. Its high concentration allows it to treat much more water at once than other conditioners.

Directions: Use 1/8 cup (2 tablespoons) for each 600-700 gallons for removing chlorine or chloramine. To detoxify high concentrations of ammonia or nitrite, use 1/4 to 1/2 cup for each 600 gallons. Sulfur odor is normal. For exceptionally high chloramine concentrations, a double dose may be used safely. To detoxify nitrite in an emergency, up to 5 times normal dose may be used. If temperature is > 30??C (86??F) and chlorine or ammonia levels are low, use a half dose.

Water Garden Oasis Pond Prime completely conditions your pond water, removing chlorine and chloramine, and detoxifying harmful ammonia and nitrite. This concentrated formula also helps neutralize heavy metals and stimulates your fishes' natural slime coats.

• Complete, concentrated conditioner for decorative ponds
• Removes chlorine and chloramine and detoxifies ammonia, nitrate and nitrite
• 5X more concentrated than other pond conditioners

Pond Prime is an essential part of setting up a new pond, adding water, and water changes. It does not cause a pH drop or overactivate skimmers. Its high concentration allows it to treat much more water at once than other conditioners.

Directions: Use 1/8 cup (2 tablespoons) for each 600-700 gallons for removing chlorine or chloramine. To detoxify high concentrations of ammonia or nitrite, use 1/4 to 1/2 cup for each 600 gallons. Sulfur odor is normal. For exceptionally high chloramine concentrations, a double dose may be used safely. To detoxify nitrite in an emergency, up to 5 times normal dose may be used. If temperature is > 30??C (86??F) and chlorine or ammonia levels are low, use a half dose.

Water Garden Oasis Pond Prime completely conditions your pond water, removing chlorine and chloramine, and detoxifying harmful ammonia and nitrite. This concentrated formula also helps neutralize heavy metals and stimulates your fishes' natural slime coats.

• Complete, concentrated conditioner for decorative ponds
• Removes chlorine and chloramine and detoxifies ammonia, nitrate and nitrite
• 5X more concentrated than other pond conditioners

Pond Prime is an essential part of setting up a new pond, adding water, and water changes. It does not cause a pH drop or overactivate skimmers. Its high concentration allows it to treat much more water at once than other conditioners.

Directions: Use 1/8 cup (2 tablespoons) for each 600-700 gallons for removing chlorine or chloramine. To detoxify high concentrations of ammonia or nitrite, use 1/4 to 1/2 cup for each 600 gallons. Sulfur odor is normal. For exceptionally high chloramine concentrations, a double dose may be used safely. To detoxify nitrite in an emergency, up to 5 times normal dose may be used. If temperature is > 30??C (86??F) and chlorine or ammonia levels are low, use a half dose.

Water Garden Oasis Pond Prime completely conditions your pond water, removing chlorine and chloramine, and detoxifying harmful ammonia and nitrite. This concentrated formula also helps neutralize heavy metals and stimulates your fishes' natural slime coats.

• Complete, concentrated conditioner for decorative ponds
• Removes chlorine and chloramine and detoxifies ammonia, nitrate and nitrite
• 5X more concentrated than other pond conditioners

Pond Prime is an essential part of setting up a new pond, adding water, and water changes. It does not cause a pH drop or overactivate skimmers. Its high concentration allows it to treat much more water at once than other conditioners.

Directions: Use 1/8 cup (2 tablespoons) for each 600-700 gallons for removing chlorine or chloramine. To detoxify high concentrations of ammonia or nitrite, use 1/4 to 1/2 cup for each 600 gallons. Sulfur odor is normal. For exceptionally high chloramine concentrations, a double dose may be used safely. To detoxify nitrite in an emergency, up to 5 times normal dose may be used. If temperature is > 30??C (86??F) and chlorine or ammonia levels are low, use a half dose.

Seachem Reef Zooplankton is a concentrated blend of marine zooplankton that contains no added dyes or synthetic pigments. This natural source of carotenoids for colorations provides essential fatty acids, proteins, vitamins and amino acids for coral growth.

• Unique blend of marine zooplankton
• Stimulates coral growth
• Provides important nutrients
• Contains a natural source of carotenoids for colorations

Reef Zooplankton is enhanced to increase the bioavailability of important nutrients, which helps corals expend less energy to derive nutritional benefit.

Directions: Shake well before using. Use 5 mL for every 190 L (50 US gallons) of water twice weekly or as required to maintain coral growth. (For reference purposes, the cap holds 5 mL.) Refrigeration after opening is recommended, but not required.

Ingredients: Fenneropenaeus chinensis, Artemia, Rotifer, Protein Hydrolysates with carotenoids, Ascorbic Acid, Citric Acid, Carboxylic Acid, Sodium Benzoate, Methylparaben, Propylparaben.

Guaranteed Analysis:
Protein (min) - 2.0%
Crude Fat (min) - 0.35%
Crude Fiber (max) - 0.5%
Moisture (max) - 96.0%
Ash (max) - 1.5%

Seachem Reef Zooplankton is a concentrated blend of marine zooplankton that contains no added dyes or synthetic pigments. This natural source of carotenoids for colorations provides essential fatty acids, proteins, vitamins and amino acids for coral growth.

• Unique blend of marine zooplankton
• Stimulates coral growth
• Provides important nutrients
• Contains a natural source of carotenoids for colorations

Reef Zooplankton is enhanced to increase the bioavailability of important nutrients, which helps corals expend less energy to derive nutritional benefit.

Directions: Shake well before using. Use 5 mL for every 190 L (50 US gallons) of water twice weekly or as required to maintain coral growth. (For reference purposes, the cap holds 5 mL.) Refrigeration after opening is recommended, but not required.

Ingredients: Fenneropenaeus chinensis, Artemia, Rotifer, Protein Hydrolysates with carotenoids, Ascorbic Acid, Citric Acid, Carboxylic Acid, Sodium Benzoate, Methylparaben, Propylparaben.

Guaranteed Analysis:
Protein (min) - 2.0%
Crude Fat (min) - 0.35%
Crude Fiber (max) - 0.5%
Moisture (max) - 96.0%
Ash (max) - 1.5%

Reef Phytoplankton is a concentrated blend of green and brown marine phytoplankton designed to provide the essential fatty acids, proteins, vitamins, and amino acids, with biological carotenoids for an invertebrate diet. Size ranges from 1-20 ?m to feed a broad range of tropical marine aquarium filter feeders and invertebrates.

• Reef Phytoplankton is a concentrated blend of green and brown marine phytoplankton
• Phytoplankton size ranges from 1-20 ?m
• Enhanced to increase the bioavailability of important nutrients

IReef Phytoplankton contains a natural source of carotenoids which provides essential proteins as well as a more bioavailable source of pigmentation when compared to other natural sources and synthetic pigments. Carotenoids provide the extra benefit of antioxidant activity. In addition, Reef Phytoplankton is enhanced to increase the bioavailability of important nutrients such as proteins, lipids, B vitamins, and other organic pigments, thus, corals expend less energy to derive the nutritional benefit. It is blended to contain the proper ratio of fatty acids, carbohydrates, and proteins. Blending phytoplankton yields better nutritional value. Studies show increased consumption of phytoplankton in filter feeders when using mixed cultures versus a single culture of phytoplankton.

DIRECTIONS: Shake well before using. Add 1 capful (5 mL) per 200 L (50 US gallons) of water twice weekly or as required to maintain coral growth. For best results, dose directly to the aquarium; target feeding can overwhelm corals and have a negative impact. Refrigeration after opening is recommended, but not required.

Seachem Replenish is specially designed to replenish physiologically needed minerals that have been removed during reverse osmosis or deionizing filtration.

• Designed to replenish physiologically needed minerals
• Restore General Hardness (GH) using "soft" and "hard" salts
• Helps prevent sudden death due to osmotic stress

Replenish will restore General Hardness (GH) using "soft" and "hard" salts. This special blend of salts will help prevent sudden death due to osmotic stress which causes osmotic shock.

Dosage: 500 ml (16.9 oz) treats 1,000 gallons.

Directions: Add 5 mL (1 capful) Replenish to 10 Gallons to raise GH by 1 meq/L (2.8 dGH). Recommended restoration level into DI or RO water is 1-2 meq/L which is 5 mL per each 5-10 gallons.

Seachem Pristine improves the water quality of freshwater and marine aquariums using bio-augmentation, a chemical-free, natural process that safely eliminates waste, sludge, excess food, and detritus. It also reduces ammonia, nitrates, and nitrites, while enhancing water clarity and overall health.

• Natural organic waste management treatment
• Rapidly and safely eliminates sludge and detritus
• Safe for freshwater and marine aquariums

Bio-augmentation uses beneficial bacteria cultures to break down and remove potentially harmful compounds in your aquarium water. By removing excess nutrients, it reduces the risk of nuisance and disease-causing organisms and helps keep the tank clear and safe. Unlike traditional nitrifying bacteria, the bacteria used in Pristine can adapt, multiply and remain effective even in harsh or low-oxygen environments. While the bacteria consume harmful compounds, they create biopolymers that help trap particulates to increase water clarity.

Directions: Shake well before use. Turn off UV/ozone. Use 1 capful (5 mL) for each 40 L (10 US gallons). Then use a maintenance dose of 1 capful (5 mL) per 80 L (20 US gallons) with additions of livestock or the disruption of the biofilter through cleaning or medications. Antibiotics should be removed with fresh carbon and a water change before adding bacteria. Allow 2 or 3 days for the bacteria to become established before using UV sterilizers or ozone. Recurring problems with high nutrients can indicate overstocking, overfeeding or inadequate filtration.

Seachem Pristine improves the water quality of freshwater and marine aquariums using bio-augmentation, a chemical-free, natural process that safely eliminates waste, sludge, excess food, and detritus. It also reduces ammonia, nitrates, and nitrites, while enhancing water clarity and overall health.

• Natural organic waste management treatment
• Rapidly and safely eliminates sludge and detritus
• Safe for freshwater and marine aquariums

Bio-augmentation uses beneficial bacteria cultures to break down and remove potentially harmful compounds in your aquarium water. By removing excess nutrients, it reduces the risk of nuisance and disease-causing organisms and helps keep the tank clear and safe. Unlike traditional nitrifying bacteria, the bacteria used in Pristine can adapt, multiply and remain effective even in harsh or low-oxygen environments. While the bacteria consume harmful compounds, they create biopolymers that help trap particulates to increase water clarity.

Directions: Shake well before use. Turn off UV/ozone. Use 1 capful (5 mL) for each 40 L (10 US gallons). Then use a maintenance dose of 1 capful (5 mL) per 80 L (20 US gallons) with additions of livestock or the disruption of the biofilter through cleaning or medications. Antibiotics should be removed with fresh carbon and a water change before adding bacteria. Allow 2 or 3 days for the bacteria to become established before using UV sterilizers or ozone. Recurring problems with high nutrients can indicate overstocking, overfeeding or inadequate filtration.

Seachem Flourish Advance is an all natural growth enhancer for live aquarium plants, with an enhanced formula that uses phytohormones, minerals, and nutrients to stimulate dramatic growth in roots and shoots. When used regularly, it also heightens mineral absorption and disease resistance.

• Natural phytohormone supplement for the planted aquarium
• Dramatically stimulates the growth of roots and shoots in aquatic plants
• Enhances mineral absorption and improves disease resistance
• Non-toxic and completely safe for all plants, fish and aquatic organisms

What makes it special Phytohormones give Flourish Enhance an edge over other aquarium plant growth enhancers. They are naturally occurring compounds that play important roles in regulating plant growth in a wide variety of processes, including cell division, formation and activity of shoot meristems, induction of photosynthesis gene expression, leaf senescence, nutrient mobilization, seed germination, root growth, and stress response.

For ten to fourteen days after application, Flourish Advance stimulates root growth beneath the surface. After this initial induction period, significantly enhanced growth in the leaves and stems of the plants will occur.

Directions: Shake well before use. Use 1 capful (5 mL) for every 80 L (20 gallons). Dose daily or as required to maintain plant growth.

Seachem Flourish Advance is an all natural growth enhancer for live aquarium plants, with an enhanced formula that uses phytohormones, minerals, and nutrients to stimulate dramatic growth in roots and shoots. When used regularly, it also heightens mineral absorption and disease resistance.

• Natural phytohormone supplement for the planted aquarium
• Dramatically stimulates the growth of roots and shoots in aquatic plants
• Enhances mineral absorption and improves disease resistance
• Non-toxic and completely safe for all plants, fish and aquatic organisms

What makes it special Phytohormones give Flourish Enhance an edge over other aquarium plant growth enhancers. They are naturally occurring compounds that play important roles in regulating plant growth in a wide variety of processes, including cell division, formation and activity of shoot meristems, induction of photosynthesis gene expression, leaf senescence, nutrient mobilization, seed germination, root growth, and stress response.

For ten to fourteen days after application, Flourish Advance stimulates root growth beneath the surface. After this initial induction period, significantly enhanced growth in the leaves and stems of the plants will occur.

Directions: Shake well before use. Use 1 capful (5 mL) for every 80 L (20 gallons). Dose daily or as required to maintain plant growth.

Seachem Flourish Advance is an all natural growth enhancer for live aquarium plants, with an enhanced formula that uses phytohormones, minerals, and nutrients to stimulate dramatic growth in roots and shoots. When used regularly, it also heightens mineral absorption and disease resistance.

• Natural phytohormone supplement for the planted aquarium
• Dramatically stimulates the growth of roots and shoots in aquatic plants
• Enhances mineral absorption and improves disease resistance
• Non-toxic and completely safe for all plants, fish and aquatic organisms

What makes it special Phytohormones give Flourish Enhance an edge over other aquarium plant growth enhancers. They are naturally occurring compounds that play important roles in regulating plant growth in a wide variety of processes, including cell division, formation and activity of shoot meristems, induction of photosynthesis gene expression, leaf senescence, nutrient mobilization, seed germination, root growth, and stress response.

For ten to fourteen days after application, Flourish Advance stimulates root growth beneath the surface. After this initial induction period, significantly enhanced growth in the leaves and stems of the plants will occur.

Directions: Shake well before use. Use 1 capful (5 mL) for every 80 L (20 gallons). Dose daily or as required to maintain plant growth.

Seachem Reef Fusion 2 is specially formulated to supply your tank with the essential carbonates, bicarbonates and alkalinity to help your corals grow. This is the second of the Reef Fusion system that helps maintain proper alkalinity for a healthy live reef environment.

• Maintains proper alkalinity levels for healthy coral growth
• 2-part Reef Fusion system maintains calcium and alkalinity levels
• Supplies tank with needed carbonates, bicarbonates and alkalinity

Reef Fusion 2 contains a mixture of carbonates and bicarbonates at an alkalinity of 4400 meq/L. It is designed to restore and maintain alkalinity in the reef aquarium and provide calcareous species with the essential carbonate needed for growth.

Directions: Dose aquarium every 1-2 days. Shake well before using. Add 1 ml of Reef Fusion 1 per 25 L (6.5 US gallons) of water. (For reference purposes, the cap holds 5 ml.) Add this to a high current area of the tank. Wait a few minutes, then add Reef Fusion 2 in the same manner, 1 ml per 25 L (6.5 US gallons), after shaking well. It is preferred that the two products be added to separate locations in the tank. This dose contributes 4 mg/L of calcium, and 0.176 meq/L of alkalinity. Never mix Reef Fusion 1 with Reef Fusion 2 directly.

Note: Do not exceed a dose of 4 ml in 25 L (6.5 US gallons) per day of each product.

Maintain calcium level between 410-430 mg/L. Maintain alkalinity between 4-6 meq/L. Size or frequency of dose may be increased if dosing regimen is insufficient to maintain calcium and alkalinity in these ranges.

Seachem KanaPlex is a blended kanamycin-based medication that safely and effectively treats several fungal and bacterial fish diseases, including dropsy, popeye, fin/tail rot, and septicemica.

• Safely and effectively treats several fungal and bacterial fish diseases
• Useful in treating internal infections
• Marine and freshwater medication

Because it is absorbed by fish, Kanaplex is useful in treating internal infections in those situations where food is refused. It does not adversely affect the filter bed and is easily removed with carbon. To enhance palatability use with Garlic Guard. Food may be refrozen.

Directions: Use 1 level spoonful (180 mg) for every 20 L (5 gallons). Repeat every 2 days as required up to a maximum of 3 doses. Turn off UV, ozone, and chemical filtration. To feed, blend 1 measure with about 1 tablespoon of frozen food paste. Food may be refrozen.

Active Ingredients: Kanamycin Sulfate (40%).
Inactive Ingredients: Potassium Sulfate (60%).

SulfaPlex is an effective and safe treatment for many bacterial, fungal and protozoan infestations in the aquarium. While it can be used in both freshwater and saltwater, it is particularly effective against the common bacterial and fungal infections of freshwater fish. It is also among the gentler antibiotics, and great for treating fish that are already stressed. It is easily removed with carbon and does not impair nitrification.

• Treats Many Bacterial, Fungal, and Protozoan Infestations
• Broad Spectrum Antibiotic and Anti-Fungal Medicatoin
• Absorbed Through Gills
• Marine & Freshwater
• One of the Gentler Antibiotics, Great for Treating Fish that are Already Stressed.

INSTRUCTIONS: Dosing in Water Remove all invertebrates - these are extremely sensitive to medication. Turn off UV filters, ozone filters, and remove chemical filtration like MatrixCarbon and Purigen. Use 2-3 measures (included) per every 40 L (10 US gallons). Repeat this dose every 72 hours for a maximum of 3 weeks. Dosing in Food SulfaPlex is most effective when used in the water, but it can also be added to the food. Feed the medicated food mix (recipe below) every day until the infection clears or up to 3 weeks. 1 scoop SulfaPlex, 1 scoop Focus, 1 tbsp food (preferably pellets or frozen food). A few drops of water if using a dry food. To enhance palatability use with GarlicGuard or Entice. After Treating When the treatment period is over, SulfaPlex can easily be removed using activated filter carbon like MatrixCarbon. It does not linger in the substrate or filter media of the tank.

INGREDIENTS: sulfathiazole (69%) Inactive ingredients: excipients (31%)

Seachem MetroPlex treats several common protozoan parasites and bacterial diseases in aquarium fish, including Cryptocaryon, Hexamita, and Ichthyophthirius (Ich). This safe, effective treatment does not adversely affect the filter bed and can be easily removed with carbon. Safe for freshwater and saltwater (marine) aquariums.

• Treats protozoan parasites and anaerobic bacterial diseases
• Use to treat Ich, Cryptocaryon and Hexamita
• For saltwater and freshwater aquariums

Directions: Use 1-2 measures (included) for every 10 gallons (40 L). Repeat every 2 days for up to 3 weeks or until symptoms disappear. Turn off UV, ozone, and filtration. To feed, blend 1 measure with about 1 tablespoon of frozen food paste. To minimize loss during feeding use with Focus. To enhance palatability use with GarlicGuard or Entice. Food may be refrozen.

Seachem PolyGuard is the single most effective medication to keep freshwater fish free of disease! It is an effective treatment and safeguards against all prevalent bacterial, fungal, and parasitic diseases of exotic fish. For use in freshwater or marine aquaria. Be aware that many diseases and infections share similar physical and behavioral symptoms, e.g. clamped fins, lesions, and loss of appetite.

• PolyGuard treats bacterial, fungal, and parasitic diseases
• Very broad spectrum freshwater medication
• Good choice when unsure of the disease

When our pets are sick, we immediately want to reach for the most powerful medication on the shelf. However, sometimes the right choice to prevent stress is to opt for a gentler medication at first, especially with less severe infections. PolyGuard is among Seachems strongest medications and is best used when you are unsure what disease you are treating or when the fish is suffering from multiple infections.

Active ingredients: sulfathiazole (36%), malachite green (1.9%), nitrofurantoin (0.14%), nitrofural (0.14%), quinacrine dihydrochloride (0.27%). Inactive ingredients: excipients (61%)

Before Treating
Remove all invertebrates - these are extremely sensitive to medication. Turn off UV filters, and ozone filters, and remove chemical filtration like MatrixCarbon and Purigen. Ensure that your tank is fully cycled and stable; poor water quality is the root cause of most fish diseases, and adding medication will do no good if the water chemistry is still bad.

Dosing:
Use 1 measure (included) per every 40 L (10 US gallons) of water. Repeat this dose every 72 hours for a maximum of 2 weeks. Repeat every 3 days for up to 2 weeks or until symptoms disappear. Use whenever introducing new fish.

After Treating
When the treatment period is over, PolyGuard can easily be removed using activated filter carbon like MatrixCarbon. It does not linger in the substrate or filter media of the tank.

Discus trace supplies a broad range of trace elements demonstrated to be necessary for proper sh health and growth. Unlike terrestrial animals, fish obtain nutrients from both their food and environment. Trace elements are normally depleted by utilization, oxidation and precipitation, thus it is important to restore them on a regular basis. Discus trace contains only those elements actually demonstrated to be required by fish.

• Discus Specific
• Restores Nutrients
• No Sodium